Hight voltage cotant current LED strip light_2835 manufactuer in Shenzhen China-Shenzhen JYWY Electronics Co., Ltd.

Product

LED Lighting

Hight voltage constant current LED strip light_2835

Applications:

Home decoration lighting

Building outline lighting

Entertainment venue decoration, auxiliary lighting

Landscape lighting

Products Name : Hight voltage constant current LED strip light_2835

Product Parameters:

Name	JYVVY-2835-60D-220V	JYVVY-2835-120D-220V	JYVVY-2835-180D-220V
Material	PVC+WIRE+FPCB	PVC+WIRE+FPCB	PVC+WIRE+FPCB
Color	transparent +white bottom	transparent +white bottom	transparent +white bottom
Size	13*7mm	15*7mm	17*7.5mm
PCB Width	8mm	10mm	12mm
LED Type	SMD2835	SMD2835	SMD2835
LED QTY	60leds/meter	120leds/m	180leds/m
Color Temperatur	3000K/4500K/6500K/R/G/B	3000K/4500K/6500K/R/G/B	3000K/4500K/6500K/R/G/B
Warranty	Indoor 36 months/ Outdoor24 months	Indoor 36 months/ Outdoor 24months	Indoor 36months/ Outdoor 24months
Input Vol.	170~305V	170~305V	170~305V
CRI	Ra≥80	Ra≥80	Ra≥80
LED Power	0.2W/LED	0.2W/LED	0.2W/LED
Strip Power	5W±0.3W	6W±0.5W	8W±0.5W
Temperature	一25~+45	一25~+45	一25~+45
Cut /Unit	0.5M/1M	0.5M/1M	0.5M/1M
Package	50M/Tape	50M/Tape	50M/Tape
Gross Wei.	7.5/KG	8/KG	13.8/KG
Carton Size	33.533.511.5mm	33.533.514.5mm	33.533.519.5mm
Volume	0.0129m³	0.0162m³	0.0218m³

Characteristic:

■ The LED strip use a constant current control chip to suppress current fluctuations and extend life.

■ Wide voltage input, the output voltage tends to be stable at 220V.

■ No stroboscopic, stable brightness and protect your eyes.

■ Lightning protection circuit design to prevent damage to the product caused by lightning strikes.

■ Short-circuit protection function, does not burn the LED strip when short-circuited, and recovers after the path. Avoid fire accidents caused by short circuit sparks.

■ PVC extrusion molding process, high product consistency and short production cycle.

■ The outer casing is molded at one time and the protection grade is IP65. It can be used indoors and outdoors.

■ Flexible lamp body with unconstrained surfaces and corners.

■ Reduced pressure, easy installation, 50 meters can ensure the same brightness.

Product acessories:

Product Composition:

Installation method:

Product Show:

Attention:

1. Each light strip is connected to a power supply and a plug, which can be easily accessed by simply plugging the plug into a power outlet. Please confirm the product power before use, ensure that the power supply line is not overloaded, and the circuit has a circuit protector, such as a power outlet with a fuse or a leakage switch. Please refer to product technology and photoelectric parameters for use.

2. If you want a custom length, you should cut it at the welding position of the 1-meter unit group, not less than the minimum unit length.Degree or cut within the unit group. Be careful after cutting, the incision should be sealed with waterproof insulating glue to avoid burning.

A bad product or a safety incident (the resulting supplier is not responsible for the damage). Please don‘t cut the length by yourself. If you need a non-standard length product, please contact our marketing staff.

3. Do not twist the lamp strip continuously. If it is twisted many times, it will cause fatigue damage to the internal power line. The twist angle is not less than 45degrees. Do not bend in the arc below 60mm in diameter. Soft lights should be used for outdoor and indoor use to prevent fire, electric shock and personal injury.

4. For the stable work of this product, please use the product in some places with good ventilation. It is forbidden to roll the entire light strip together.

5. In order to ensure the life of LED strip, it is recommended that the power cord should not be pulled hard during the process of use.

Hit and force the surface of the LED bead. The light bar must be installed and fixed firmly, and there must be no fluttering or swinging.
Otherwise, the light bar wire is fatigued and broken, the lamp strip is damaged;

6. The tail end of the light bar must be covered with a tail plug; when used outdoors, each interface must be secure, no short circuit hidden danger, household

When installing externally, the interface must be sealed with glass glue or other suitable methods to ensure that the interfaces do not enter the water;

7. Install and fix, do not use metal materials such as iron wire to tightly tie the lamp to prevent the wire from falling into the light bar, causing short circuit leakage and burning of the light bar;

8. If the light strip is damaged, please cut off the unit immediately and do not continue to use it to avoid danger.

9. This product is not a children‘s toy, but it is easy to cause children‘s interest. Please install it in a place that children can‘t reach or under adult supervision. It is strictly forbidden to use this product directly in places where people such as swimming pools and rivers are in close contact to prevent safety accidents.